Processing Ajax...

Title
Close Dialog

Message

Confirm
Close Dialog

Confirm
Close Dialog

Top WallpaperFusion Members for January 2016Top WallpaperFusion Members for January 2016

February 1, 2016

Congratulations to our top contributing members for January 2016! They have been hard at work submitting, rating, and discussing images on WallpaperFusion, and have racked up some impressive reputation scores along the way!

Contributors
1.
LavenderGirl54's profile on WallpaperFusion.com
2.
Carsen Vaughn1's profile on WallpaperFusion.com
3.
fractalRat's profile on WallpaperFusion.com
4.
Judith Lane's profile on WallpaperFusion.com
5.
Stuie's profile on WallpaperFusion.com
6.
Trish Overton's profile on WallpaperFusion.com
7.
Zataralee's profile on WallpaperFusion.com
8.
Jimmy Robinson's profile on WallpaperFusion.com
9.
limbbream's profile on WallpaperFusion.com
10.
Egon Wolf Miranda159262's profile on WallpaperFusion.com
JigsawMania
1.
Gary57's profile on WallpaperFusion.com
2.
Cammymac's profile on WallpaperFusion.com
3.
Linda Hoy920144's profile on WallpaperFusion.com
4.
puzzle geek's profile on WallpaperFusion.com
5.
Cliff15's profile on WallpaperFusion.com
6.
Dolly Murray954284's profile on WallpaperFusion.com
7.
Brian165's profile on WallpaperFusion.com
8.
Jackie Schryer's profile on WallpaperFusion.com
9.
scf's profile on WallpaperFusion.com
10.
demiieyyred's profile on WallpaperFusion.com

Check out the current top members or look at previous months on our Top Members page!

Automatically Save and Restore Window Positions on Sleep/ResumeAutomatically Save and Restore Window Positions on Sleep/Resume

January 29, 2016
Some types of HDMI monitors, and most DisplayPort monitors will be "disconnected" from the computer when powered off or when entering sleep mode. This causes Windows to do a full display re-detection on sleep and resume, which repositions open application windows.
DisplayFusion is able to save your window positions before the system sleeps and restore them when it wakes. The steps below describe how to achieve this with DisplayFusion:
Note:
If your system is not set to lock on sleep or screen saver, the window positions won't be automatically restored when resuming from sleep or screen saver.
  • Right-click the DisplayFusion icon and click "Settings."
  • Select the "Triggers" tab, then enable the "Enable Triggers" checkbox.
  • Click the "Add" button.
  • Click the "Event" dropdown and select "System Idle."
  • In the "Idle Timeout (sec)" field, add the time in seconds less one minute of the time your monitors/system is configured to sleep. (e.g. If monitors are set to sleep after 10 minutes, set the Idle Timeout to "540")
  • In the "Actions" area, click "Add" and select "Run Function."
  • In the pop-up, select "Save Window Positions" and click "OK."
  • Click "OK" to save the Trigger rule.
  • Click the "Add" button again.
  • For the "Event" dropdown, select "Desktop Unlocked."
  • Click "Add," then click "Wait," entering "5000" in the text field. Click "OK." If the 5000 ms wait is working well, you can try reducing that to speed up the restore time.
  • Click "Add" again, this time clicking "Run Function" and selecting "Restore Window Positions From Last Scene." Click "OK."
  • Click "OK" to save the Trigger rule.
  • You'll see your newly-added Triggers with a green background, indicating they are enabled.
    To manually load the positions, assign a key combination to the "Restore Window Positions From Last Save" function. Follow these steps, if needed:
  • Select the "Functions" tab in DisplayFusion's Settings window, select the function "Restore Window Positions From Last Save," then click "Edit."
  • Select your modifiers and enter a key, then click "OK."
  • You'll see your Key Combination in the column next to the Function. Click "Apply" to finalize your changes.
  • Click "OK" to apply the DisplayFusion Settings.

Working with TriggersWorking with Triggers

January 28, 2016
DisplayFusion Triggers are a powerful and versatile way to automate your window management tasks. This document details the configuration options for Triggers and showcases several examples.
To navigate to DisplayFusion's Triggers, right-click on the DisplayFusion tray icon and click "Settings."
Click on the "Triggers" tab and ensure the "Enable Triggers" checkbox is enabled. Individual Triggers can be enabled/disabled by selecting them from your list and using the "Enable" and "Disable" buttons at the bottom of the Triggers window.
To begin with a new Trigger, click the "Add" button.
Every Trigger needs an Event to initiate it and at least one Action to perform. Other requirements and restrictions can be applied via the many Trigger Options and Match Conditions as detailed in the sections below.
By default, the Trigger is enabled. You can disable it by disabling this checkbox.
Events are what initiate the Trigger's actions. Some Event selections will require more details in the Match Conditions pane of the Edit Trigger window. Below are the current Event options:
Each Event can be set for use with a specific Monitor Profile using the relevant options in the Match Conditions pane.
Event Definition Additional Options Match Conditions Requirements
DisplayFusion Starts This will initiate the Trigger when the DisplayFusion software runs. Don't run this trigger when the desktop is locked None
DisplayFusion Exits This will initiate the Trigger when the DisplayFusion software is stopped. Don't run this trigger when the desktop is locked None
Desktop Locked This will initiate the Trigger when the Windows desktop is locked. None None
Desktop Unlocked This will initiate the Trigger when the Windows desktop is unlocked. None None
Monitor Profile Changed This will initiate the Trigger when DisplayFusion changes its Monitor Profile. Monitor Profiles are managed from the Monitor Configuration section accessed via the Options tab of DisplayFusion Settings. Don't run this trigger when the desktop is locked None
Process Created This will initiate the Trigger when a Process runs. Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Delay before checking match conditions Requires a Process Filename entry.
Process Ended This will initiate the Trigger when a Process stops. Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Delay before checking match conditions Requires a Process Filename entry.
System Idle This will initiate the Trigger when the system is marked as idle. DisplayFusion uses the built-in Windows idle timer for System Idle Events. Idle Timeout, Don't run this trigger when the desktop is locked None
System Wakes from Sleep This will initiate the Trigger when the system wakes from sleep. Don't run this trigger when the desktop is locked None
Timer Interval This will initiate the Trigger on a regular interval. Interval (required), Don't run this trigger when the desktop is locked None
Window Created This will initiate the Trigger when a window is created. Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Window Text, Window Class, Delay before checking match conditions Requires a Process Filename, Window Text, OR Window Class entry.
Window Destroyed This will initiate the Trigger when a window is destroyed (closed). Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Window Text, Window Class, Delay before checking match conditions Requires a Process Filename, Window Text, OR Window Class entry.
Window Focused This will initiate the Trigger when a window is focused on. Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Window Text, Window Class, Delay before checking match conditions Requires a Process Filename, Window Text, OR Window Class entry.
Window Maximized This will initiate the Trigger when a window is maximized. Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Window Text, Window Class, Delay before checking match conditions Requires a Process Filename, Window Text, OR Window Class entry.
Window Minimized This will initiate the Trigger when a window is minimized. Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Window Text, Window Class, Delay before checking match conditions Requires a Process Filename, Window Text, OR Window Class entry.
Window RestoredThis will initiate the Trigger when a window is restored. Frequency, Stop processing triggers if this one matches, Don't run this trigger when the desktop is locked, Process Filename, Process Command Line Parameters, Window Text, Window Class, Delay before checking match conditions Requires a Process Filename, Window Text, OR Window Class entry.
Option Definition Dependency Required?
Don't run this trigger when the desktop is locked This Trigger will not run when the Windows desktop is in the locked state Available for all Events except for Desktop Locked/Unlocked No
Frequency Configures how often the Trigger is run per instance (options: Always, Once-per-Process ID, Once-per-Process Name, Once-per-Window) Limited to Process Created, Process Ended, Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events Yes (Default Always)
Stop Processing triggers if this one matches When this Trigger is run, subsequent matching Triggers will not run. Limited to Process Created, Process Ended, Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events No
Idle Timeout (sec)Once the system has gone idle, the Trigger will delay this number of seconds before running any of the Trigger's actions. Limited to System Idle Event Yes (Requires a value of 1 or more)
Interval A delay in seconds before running any of the Trigger's actions. Limited to Timer Interval Event Yes (Requires a value of 1 or more)
When Process and Window Match Conditions are made available, at least one will need to be populated to save the Trigger.
Condition Definition Dependency Required?
Process Filename Limits the Trigger to a specific application (Enable the checkbox and use the Select Application button to choose. Wildcard usage is acceptable, e.g. C:\Applications\*, or *.*) Limited to Process Created, Process Ended, Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events No
Process Command Line Parameters Limits the Trigger to Applications with specific Parameters (Enable the checkbox to use. Drop the blue target icon onto windows to auto-populate or reference the Windows Task Manager Command Line column for a running process) Limited to Process Created, Process Ended, Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events No
Window Text Limits the Trigger to Applications with specific window Titles (Enable the checkbox to use. Drop the blue target icon onto windows to auto-populate. Multiple entries can be added with a space between each. For other options, see Text Queries.) Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events No
Window Class Limits the Trigger to Applications with specific window Classes. (e.g. dialogs, settings windows, etc. Enable the checkbox to use. Drop the blue target icon onto windows to auto-populate. Multiple entries can be added with a space between each. For other options, see Text Queries.) Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events No
Monitor Profile Limits the Trigger to a specific Monitor Profile. (Enable the checkbox and select a profile to use.) Available for all Events No
Delay before checking match conditions (MS) Sets a delay in milliseconds before checking any set Match Conditions. Limited to Process Created, Process Ended, Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events No
The Actions are what the Trigger performs when initiated. The Actions are performed in the order presented, but can be re-ordered by dragging them into new positions in the Actions pane.
To add Actions, click the "Add" dropdown and select from the Action options. Some options will bring up a window for additional settings. Use the Edit and Delete buttons to edit and delete Actions from the list.
Action Definition Dependency Additional Options
Wait Sets a delay in milliseconds before the next Action is run (Requires a value of 1 or more). Available for all Events None
Move Window to Selected Monitor Moves the window matching the conditions to a specific monitor. Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events Choice of monitor (required)
Move Window to Mouse Cursor Monitor Moves the window matching the conditions to the monitor where the mouse cursor is located. Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events None
Move Window to Specific Size and Location Moves the window matching the conditions to a specific location and size. (Drop the blue target icon on the window to auto-populate the size and location.) Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events Size and Location Values (required), Maximize Window
Maximize Window Maximizes the window matching the conditions. Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events None
Minimize Window Minimizes the window matching the conditions. Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events None
Center Window on Monitor Centers the window matching the conditions on its current monitor. Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events None
Span Window Maximizes the window matching the conditions across all monitors. Limited to Window Created, Window Destroyed, Window Focused, Window Maximized, Window Minimized, Window Restored Events None
Show Notification Displays a notification. (Uses Windows notification system.) Available for all Events Notification text
Run Function Runs a pre-defined DisplayFusion function. Available for all Events Function select from dropdown (Required)
Run Function: Add New Custom Function Runs a user-customized DisplayFusion function. For more detail, see Custom Functions Available for all Events Name (Required), Function Action (Required), Action configuration (Required), HotKey Combination
Run Function: Add New Scripted Function Runs a user-scripted DisplayFusion function. Available for all Events Language (Required), Name (Required), HotKey Combination, Description, Custom Code
Click "OK" to save the Trigger.
Once a Trigger is configured and saved, it will appear in the Triggers tab list. By selecting a Trigger, you can then edit, delete, enable, and disable it using the buttons at the bottom of the tab window. Triggers within the same Event grouping (e.g. Process Created) will run in the order listed, but can be re-ordered by dragging the Trigger into a new position.
To save and apply any changes, click the "OK" button at the bottom of the Settings window.

DisplayFusion 7.3.4 Now Available!DisplayFusion 7.3.4 Now Available!

January 20, 2016

We're happy to announce that DisplayFusion 7.3.4 is now available for download! This release fixes a login issue with a few of the wallpaper plugins, as well as an issue with DisplayFusion detecting the wrong DPI scaling value on some systems.

Updating DisplayFusion

We encourage everyone to update to this new version today to take advantage of these improvements. If you've already purchased DisplayFusion, it's a lifetime license, so you can upgrade to this version at no cost! If you would like to see a complete list of all the changes, please visit the DisplayFusion Change Log.

DisplayFusion 7.3.3 Now Available!DisplayFusion 7.3.3 Now Available!

January 19, 2016

We're pleased to announce that DisplayFusion 7.3.3 is now available for download! This release fixes a few issues that have popped up since the 7.3.2 release.

DisplayFusion 7.3.3 Highlights

  • New Flickr API key (old one is no longer valid)
  • Google wallpaper plugin now requires your own API key (instructions)
  • Taskbar button compatibility fix for MobaXTerm
  • Added an "Our Apps" tab to the Settings window, to provide info on our other products (can be disabled in Advanced Settings)
  • A few other behind the scenes improvements

Updating DisplayFusion

We encourage everyone to update to this new version today to take advantage of these improvements. If you've already purchased DisplayFusion, it's a lifetime license, so you can upgrade to this version at no cost! If you would like to see a complete list of all the changes, please visit the DisplayFusion Change Log. We'd like to send out a big thanks to the dozens of people who helped with the DisplayFusion translations, and the thousands of people that helped test the Beta versions. Thanks everyone!

Installer OptionsInstaller Options

January 14, 2016

Please note: If you're deploying LogFusion via Active Directoy GPO, please read the MSI Installation section carefully, and as always, make sure to test it thoroughly before deploying it into production.

Note: The LogFusion installer requires administrative privileges in order to run successfully. If the installer is run using an account that doesn't have administrative privileges on the system, UAC will request the credentials for an administrative account on the system.

EXE Installation

For more options, please consult the Inno Setup help file that comes with Inno Setup.


The following parameters are especially useful for deployments.


/SILENT
Enables Silent Install option (shows progress while running)

/VERYSILENT
Enables Silent Install option (does not show progress while running)

/LANG=en
Forces the installation language to English

/DIR="c:\folder"
Sets the default installation folder

/LKEYUSER="license key"
Specifies the license key for the current user (the user running the installation)

/LKEYALL="license key"
Specifies the license key for all users

/LPATHUSER="C:\license.txt"
This parameter can be used instead of /LKEYUSER. Specifies a text file containing the license key for the current user. Also accepts UNC paths.

/LPATHALL="C:\license.txt"
This parameter can be used instead of /LKEYALL. Specifies a text file containing the license key for all users. Also accepts UNC paths.

/LAUNCHAFTER=0
LogFusion will not run automatically after setup completes.

/MERGETASKS="!desktopicon,!desktopicon\common,!desktopicon\user"
Setup will not create a Desktop icons

/MERGETASKS="desktopicon,desktopicon\common,!desktopicon\user"
Setup will create a Desktop icon for all users


MSI Installation

You can use any of the standard Windows Installer command line options.

To perform a standard silent installation (note that the parameters are case sensitive):

msiexec.exe /i "LogFusionSetup.msi" /qn CUSTOM1="/VERYSILENT" LAUNCHAFTER=0 LKEYALL="license key"

Important Note:
When deploying via Group Policy Software Installation, you absolutely must use the included MST (transform) file on the Modifications tab, otherwise the installation will never complete.


The following MSI properties are especially useful for deployments. Any of the properties below can be included in an MST (transform) file if deploying via Group Policy. If you create your own MST file, you must include the CUSTOM1="/VERYSILENT", and LAUNCHAFTER=0 properties for deploying the MSI through Group Policy Software Installation.


PATH="c:\folder"
Sets the default installation folder

LKEYUSER="license key"
Specifies the license key for the current user (the user running the installation)

LKEYALL="license key"
Specifies the license key for all users

LPATHUSER="C:\license.txt"
This parameter can be used instead of /LKEYUSER. Specifies a text file containing the license key for the current user. Also accepts UNC paths.

LPATHALL="C:\license.txt"
This parameter can be used instead of /LKEYALL. Specifies a text file containing the license key for all users. Also accepts UNC paths.

LAUNCHAFTER=0
LogFusion will not run automatically after setup completes.

TASKS="!desktopicon,!desktopicon\common,!desktopicon\user"
Setup will not create a Desktop icons

TASKS="desktopicon,desktopicon\common,!desktopicon\user"
Setup will create a Desktop icon for all users

Top WallpaperFusion Members for December 2015Top WallpaperFusion Members for December 2015

January 1, 2016

Congratulations to our top contributing members for December 2015! They have been hard at work submitting, rating, and discussing images on WallpaperFusion, and have racked up some impressive reputation scores along the way!

Contributors
1.
Zataralee's profile on WallpaperFusion.com
2.
LavenderGirl54's profile on WallpaperFusion.com
3.
CDEEPK's profile on WallpaperFusion.com
4.
MazQue's profile on WallpaperFusion.com
5.
DLJunkie's profile on WallpaperFusion.com
6.
Koorosh Ghotb's profile on WallpaperFusion.com
7.
Judith Lane's profile on WallpaperFusion.com
8.
djunet julianto's profile on WallpaperFusion.com
9.
Joseph Di Giovanni's profile on WallpaperFusion.com
10.
Kirk Meyer's profile on WallpaperFusion.com
JigsawMania
1.
scf's profile on WallpaperFusion.com
2.
Gary57's profile on WallpaperFusion.com
3.
shorty2's profile on WallpaperFusion.com
4.
Cliff15's profile on WallpaperFusion.com
5.
mary15's profile on WallpaperFusion.com
6.
grandma's profile on WallpaperFusion.com
7.
Dolly Murray954284's profile on WallpaperFusion.com
8.
Kimmyj1's profile on WallpaperFusion.com
9.
MissMii's profile on WallpaperFusion.com
10.
Debbie Hintzer368178's profile on WallpaperFusion.com

Check out the current top members or look at previous months on our Top Members page!

Hot Diggity, the 2015 Holiday Sale is Here!Hot Diggity, the 2015 Holiday Sale is Here!

December 22, 2015

UPDATE: The sale is now over. Thanks everyone!

It's that time of year again! Helps us celebrate the holidays and ring in the New Year with some fantastic deals on all of our software!

We're offering all of our products at a sale price of up to 50% off, until January 4th!

If you're not familiar with all of our apps, feel free to check them out on our More Apps page.

DisplayFusion
DisplayFusion
VoiceBot
VoiceBot
FileSeek
FileSeek
ClipboardFusion
ClipboardFusion
iTunesFusion
iTunesFusion
LogFusion
LogFusion

Remote Event LogsRemote Event Logs

December 14, 2015

General Requirements for Remote Event Logs

If LogFusion fails to connect to a remote server's event logs, make sure to check the following:

  • Make sure Remote Management is allowed through the Windows Firewall on the remote server.
  • Make sure the Remote Registry service is started on the remote server.
  • Make sure you're specifying the credentials of an account that have permissions to open the Event Logs on the remote server. Note: LogFusion uses WMI to connect to the remote server. If the remote server is not on a domain, and UAC is enabled on the remote server, the WMI call will fail. For remote servers that are on a domain and have UAC enabled, make sure the credentials you specify in LogFusion are for a domain user that is a member of the local Administrators group on the remote server. More information on this restriction can be found in the "Handling Remote Connections Under UAC" section of the following MSDN article: http://msdn.microsoft.com/en-us/library/windows/desktop/aa826699(v=vs.85).aspx

Note: If you're connecting to a Windows 8 machine, you'll need to do some additional configuration on the Windows 8 machine.

Extra Requirements for Windows 8

If you're connecting to a remote Windows 8 machine to view the Windows Event Logs or Event Channels, you'll need to perform some additional configuration steps on the remote Windows 8 machine.

  • Make sure you've already verified the settings in "General Requirements for Remote Event Logs" section above
  • Add the user account that you're connecting with to the "Administrators" and "Event Log Viewers" security groups
  • Open the Component Services MMC snap-in (Start > Run > dcomcnfg)
  • Expand "Component Services" > "Computers," then right-click "My Computer" and choose "Properties"
  • On the COM Security tab, click the "Edit Limits" button in the "Launch and Activation Permissions" section
  • Click the "Add" button, type in "Authenticated Users" and click OK
  • Make sure "Authenticated Users" is selected in the list, then enable the "Remote Activation" checkbox and click OK, then OK again
  • Open the WMI Control MMC snap-in (Start > Run > wmimgmt.msc)
  • Right-click "WMI Control (Local)" and choose "Properties"
  • Expand "Root," then select "CIMV2" and click the "Security" button
  • Make sure "Authenticated Users" is selected in the list, then enable the "Remote Enable" checkbox and click OK, then OK again
  • When entering the credentials in the LogFusion connection dialog, make sure to put the remote Windows 8 machine's computer name in the "Domain" box

ClipboardFusion 4.2 Now Available!ClipboardFusion 4.2 Now Available!

December 2, 2015

ClipboardFusion 4.2 is now available for download! This version contains some background syncing improvements, a few bug fixes, and a couple of new options:

  • Login box is no longer missing at 200% DPI scaling
  • The Copy button on the Macros tab now works as expected
  • Images now show up in History even if scrubbing is enabled
  • Text scrubbing notification is no longer shown when the option is disabled
  • Image preview popup on hover no longer overlaps context menu
  • Increased the Recent and Pinned Items limits to 75
  • Made some background sync improvements to reduce data usage
  • Added the ability to assign hotkeys for pasting History items 1-9
  • Added search boxes to the Recent and Pinned sub-menus in the context menu
  • Added an option to disable the notification when clearing the clipboard contents

We encourage everyone to update to this new version today to take advantage of these improvements. If you've already purchased ClipboardFusion, it's a lifetime license, so you can upgrade to this version at no cost!

If you would like to see a complete list of all the changes, please visit the ClipboardFusion Change Log.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788