We're very excited to announce that DisplayFusion 9.0 Beta 3 is available for download! This release fixes a few small issues with the first beta versions.

DisplayFusion 9.0 Beta 3 Highlights

• Resolved an issue with DisplayFusion that caused it to hang when monitors wake up sometimes
• Partly resolved an issue with MalWare Bytes Ransomware protection conflicting with the DisplayFusion auto-updater

Updating DisplayFusion

We encourage anyone who likes to test the bleeding edge to update to this new version today to take advantage of these improvements. If you've already purchased DisplayFusion, it's a lifetime license, so you can upgrade to this version at no cost! If you would like to see a complete list of all the changes, please visit the DisplayFusion Beta Change Log.

Desktop Wallpaper

DisplayFusion 9.0 Beta 2 is now available for download! This release fixes an issue from Beta 1 where the taskbar would stay on top of full screen windows, and a couple of other minor issues.

DisplayFusion 9.0 Beta 2 Highlights

• Taskbar no longer stays on top of full screen windows
• Wallpaper now applies correctly when tiling very small images
• Right-click on Slack and Discord tray icons now works correctly

Updating DisplayFusion

We encourage anyone who likes to test the bleeding edge to update to this new version today to take advantage of these improvements. If you've already purchased DisplayFusion, it's a lifetime license, so you can upgrade to this version at no cost! If you would like to see a complete list of all the changes, please visit the DisplayFusion Beta Change Log.

We're happy to announce that iTunesFusion 3.1 is now available for download! This version is built against the latest version of iTunes, and fixes an issue that prevented some computers from syncing.

Updating iTunesFusion

We encourage everyone to update to the new version today to take advantage of these improvements. If you would like to see a complete list of all the changes, please view the iTunesFusion Change Log.

iTunesFusion Screenshots

iTunesFusion Sync Window

Triggers are essentially a much more comprehensive version of Text Scrubbing and Text Replace, and as such, it replaces the existing features. ClipboardFusion Beta 5 will import your existing Text Scrubbing and Text Replace rules, so anything you've setup already shouldn't be affected. If you do notice any issues with the imported rules, please let us know. The installer and auto-updater will automatically back up your settings, so if anything bad happens to your Text Scrubbing or Text Replace rules, you can roll back to your last version and restore your settings from before the update.

The Triggers feature adds a bunch of new functionality for automating your workflow:

• You can now have ClipboardFusion do more than just automatically scrub and replace text. You can also set up Triggers to run when you start or exit ClipboardFusion, when you lock or unlock your computer, change focus to another window, and much more. We're planning to add more events in the future.
• Triggers have the ability to only run when they match certain conditions, such as matching text on the Clipboard, matching window text and window class, in addition to process, and process command line parameters.
• Triggers can perform multiple actions, and there are now more actions than Text Scrubbing and Text Replace. You will be able to run Macros, play sounds, show notifications, and fire Hotkeys.

Let's start with an overview of the different fields in the Trigger edit window.

• Event: Select what event should trigger this rule. For example, the "Trigger Command Received" event will fire when the Trigger command (specified on the Triggers tab or via the ClipboardFusion tray icon) is detected. For example, always, double-copy only, or always except on double-copy.
• Don't process Triggers after this one if matched: Enabling this checkbox will tell ClipboardFusion to stop processing the rules for this Trigger Event type if this rule is matched. If you have a wildcard (*.*) rule after this rule in the list, you'd want to enable this checkbox if you don't want the *.* rule to also run when this rule is finished.
• Set Clipboard with the result of this Trigger: Enabling this checkbox will set the current clipboard text to the text that is returned from this Trigger rule. In most cases, you'll want this checkbox enabled. You would disable it if the rule runs a Macro that returns null, or performs actions not directly related to the text on the clipboard (e.g. if your Macro saves the clipboard text to a file).
• Clipboard Text (optional): Use this Match Condition if you want the Trigger rule to run only when certain clipboard text is on (or not on) the clipboard. There are different match types for this condition (clipboard text contains, doesn't contain, is exactly, etc).
• Process Filename (optional): You can manually enter the path to the application, or click the "Select Application" button to choose it. This option also accepts wildcards (e.g. C:\Applications\*, or *.*).
• Process Command Line Parameters (optional): In some cases, you may only want the rule to match if the program is running with specific command line parameters (e.g. if VLC was started with the --repeat parameter). Enter the parameters exactly in this option. You can view them for a running process by adding the "Command Line" column to the Windows Task Manager. You can also auto-populate this field by dragging the target icon and dropping it on the running program window.
• Window Text (optional): This option will allow you to specify a full or partial window title to match by. You can auto-populate this field by dragging the target icon and dropping it on the window you'd like to grab the title from. This field uses our text query engine, allowing you to specify multiple titles, and exclude certain text as well.
• Window Class (optional): This option will allow you to specify the window class to match. This is generally useful if you want to move only certain windows of an application (e.g. dialogs, settings windows, etc). You can auto-populate this field by dragging the target icon and dropping it on the window you'd like to grab the class from. This field uses our text query engine, allowing you to specify multiple classes, and exclude certain text as well.
• Actions: This is where you'll add all of the actions you'd like to perform when the Trigger rule runs. You can scrub text (removes leading and trailing spaces, line breaks, tabs, and formatting), replace parts of the text with new text, set new output text (this will change what text gets sent to actions after this one) and run ClipboardFusion HotKeys and Macros. You can also add a Play Sound or Show Notification action if you want a positive confirmation that the Trigger rule was run.

Examples

Here are a few example Trigger rules. These are fairly basic, but should show the basic concepts of Trigger rules, and from there, you can get more specific with your Match Conditions, add more Actions, or get really crazy with custom scripted Macros. The possibilities are endless!

Simple Text Replace Rule

This rule will replace the word "pizza" with the word "hamburger" in text copied from any program.

• On the Settings > Triggers tab, click Add > Text Replace.
• In the Match Text field, enter the text you want to look for, e.g. "pizza".
• In the Replace Text field, enter the text you want to replace the Match Text with, e.g. "hamburger".
• Click OK to save the rule, and Apply to save the ClipboardFusion Settings (the rule won't take effect until the main ClipboardFusion Settings have been applied).

Text Replace Rule for a Specific Application

This rule will replace the word "pizza" with the word "hamburger" only in text copied from Notepad.

• On the Settings > Triggers tab, click Add > Trigger.
• Enable the "Process Filename" checkbox, and select Notepad using the "Select Application" window that opens. If Notepad isn't currently running, just click Cancel, and type "*Notepad.exe" into the Process Filename textbox.
• In the Actions pane, click Add > Text Replace.
• In the Match Text field, enter the text you want to look for, e.g. "pizza".
• In the Replace Text field, enter the text you want to replace the Match Text with, e.g. "hamburger".
• Click OK to save the Text Replace Action, then OK to save the Trigger rule, and Apply to save the ClipboardFusion Settings.

Scrub and Replace then Show Notification

This rule will scrub the whitespace from the beginning and end of text, replace the word "pizza" with "hamburger", then display a notification if any changes to the text were made.

• On the Settings > Triggers tab, click Add > Trigger.
• In the Actions pane, click Add > Scrub Text.
• In the window that pops up, enable the first two options, then click OK.
• In the Actions pane, click Add > Text Replace.
• In the Match Text field, enter the text you want to look for, e.g. "pizza".
• In the Replace Text field, enter the text you want to replace the Match Text with, e.g. "hamburger".
• Click OK to save the Text Replace Action.
• In the Actions pane, click Add > Show Notification if Text Changes.
• Enter "Whitespace trimmed and text replaced", then Click OK.
• Click OK to save the Trigger rule, and Apply to save the ClipboardFusion Settings.

Trigger rules are processed in the order that they're shown in each section of the list on the Triggers tab. Each Trigger type is separate from the others, so if a window is focused, only the rules in the Window Focused section will be processed. Tip: If you're using a mix of rules with specific match criteria, and rules with wildcard criteria, it's best to move the wildcard rules to the bottom of the list, so that the more specific rules get processed first.

As always, if you run into any issues, or have any questions or concerns, please don't hesitate to ask!

We're very excited to announce that DisplayFusion 9.0 Beta 1 is finally available for download! This release has many fixes and improvements, but the biggest one by far is multi-DPI improvement on Windows 10. We spent a very long time working out the kinks in multi-DPI environments, and nearly all of them are resolved! The Settings, Desktop Wallpaper, and Monitor Configuration windows should now all re-scale correctly, regardless of which monitor they're on, or moved to.

DisplayFusion 9.0 Beta 1 Highlights

• Major changes to support multi-DPI scaling in Windows 10
• Improved Windows 10 compatibility (Anniversary and Creators updates)
• Scripted Functions now support descriptions
• Scripted Function editor now shows exceptions in the output
• Added new scripting functions
• Renamed "Windows Logon" to "Windows Lock Screen"
• Support requests now allow file attachments to be sent
• DisplayFusion desktop icon now opens the Settings window, instead of seemingly doing nothing
• Panaramio removed from DisplayFusion, it's dead now
• Google Image Search is fixed (API change on the Google Servers)
• Alt+Tab no longer shows 6 entries for MS Edge
• WindowBlinds and Start10 compatibility improvements
• Digital Blasphemy now returns the correct sized images
• No longer "loses" some image files or sources in the Wallpaper window
• TitleBar Button compatibility improvements
• Alt+Tab compatibility improvements
• Taskbar compatibility improvements

Updating DisplayFusion

We encourage anyone on a multi-DPI setup, or anyone who likes to test the bleeding edge to update to this new version today to take advantage of these improvements. If you've already purchased DisplayFusion, it's a lifetime license, so you can upgrade to this version at no cost! If you would like to see a complete list of all the changes, please visit the DisplayFusion Beta Change Log.

Congratulations to our top contributing members for May 2017! They have been hard at work submitting, rating, and discussing images on WallpaperFusion, and have racked up some impressive reputation scores along the way!

Contributors 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

JigsawMania 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

Check out the current top members or look at previous months on our Top Members page!

We're pleased to announce that HashTools 4.0 is now available for download! We encourage everyone to update to this new version today to take advantage of these improvements.

• Now targeting the .NET Framework 4.6, which will automatically install during setup if needed
• Improved match/no match icons and row highlighting
• Added an option for generating .md5, .sha1, etc files for each file checked
• General performance and stability improvements
• Much better support for monitor scaling, especially multi-DPI setups
• Stops checking files in SFV when missing file is detected
• Added a retry delay in case another process (e.g. antivirus) had the file temporarily locked

HashTools Screenshots

We're happy to announce that ASP.NET ViewState Helper 3.0 is now available for download! This version adds support for the latest versions of Firefox, and improves compatibility with Windows 10 Anniversary and Creators updates.

ASP.NET ViewState Helper 3.0 Highlights

• Added support for the latest Firefox (need to mouse over the Firefox window to inspect it)
• General improvements and changes
• Major changes to support multi-DPI scaling in Windows 10
• Improved Windows 10 compatibility (Anniversary and Creators updates)

Updating ASP.NET ViewState Helper

We encourage everyone to update to the new version today.

ASP.NET ViewState Helper Screenshots

ASP.NET ViewState Helper Main Window

We're happy to announce that iTunesFusion 3.0.1 is now available for download! This is a quick bug-fix release to fix a few issues that popped up in the 3.0 release from last week.

Updating iTunesFusion

We encourage everyone to update to the new version today to take advantage of these improvements. If you would like to see a complete list of all the changes, please view the iTunesFusion Change Log.

iTunesFusion Screenshots

iTunesFusion Sync Window

We're happy to announce that LogFusion 6.0.1 is now available for download! This is a quick bug-fix release to fix a few issues that popped up in the 6.0 release from last week.

Updating LogFusion

We encourage everyone to update to the new version today.

LogFusion Screenshots

LogFusion Main Window